Choosing the right roofing material for your home

Roof system components

All steep-slope roof systems (i.e., roofs with slopes of 25 percent or more) have five basic components

  1. Roof covering: shingles, tile, slate or metal and underlayment that protect the sheathing from weather.
  2. Sheathing: boards or sheet material that are fastened to roof rafters to cover a house or building.
  3. Roof structure: rafters and trusses constructed to support the sheathing.
  4. Flashing: sheet metal or other material installed into a roof system’s various joints and valleys to prevent water seepage.
  5. Drainage: a roof system’s design features, such as shape, slope, and layout that affect its ability to shed water.

Choosing a roof system

There are a number of things to consider when selecting a new roof system. Of course, cost and durability head the list, but aesthetics and architectural style are important, too. The right roof system for your home or building is one that balances these five considerations. The following roofing products commonly are used for steep-slope structures.

Asphalt shingles possess an overwhelming share of the U.S. steep-slope roofing market and can be reinforced with organic or fiberglass materials. Although asphalt shingles reinforced with organic felts have been around much longer, fiberglass-reinforced products now dominate the market.

Organic shingles
consist of a cellulose-fiber (i.e., wood) base that is saturated with asphalt and coated with colored mineral granules.
Fiberglass shingles
consist of a fiberglass mat, top-and-bottom layers of asphalt, and mineral granules. Asphalt shingles’ fire resistances, like most other roofing materials, are categorized by Class A, B or C. Class A signifies the most fire-resistant; Classes B and C denote less fire resistance. Generally, most fiberglass shingles have Class A fire ratings, and most organic shingles have Class C ratings.

A shingle’s reinforcement has little effect on its appearance. Organic and fiberglass products are available in laminated (architectural) grades that offer a textured appearance. Zinc or copper-coated ceramic granules also can be applied to organic or fiberglass products to protect against algae attack, a common problem in warm, humid parts of the United States. Both types of shingles also are available in a variety of colors.

Regardless of their type of reinforcement or appearance, asphalt shingles’ physical characteristics vary significantly. When installing asphalt shingles, NRCA recommends the use of shingles that comply with American Society for Testing and Materials (ASTM) standards-ASTM D 225 for organic shingles and ASTM D 3462 for fiberglass shingles. These standards govern the composition and physical properties of asphalt shingles; not all asphalt shingles on the market comply with these standards. If a shingle product complies with one of these standards, it is typically noted in the manufacturer’s product literature and on the package wrapper.

Wood shingles and shakes are made from cedar, redwood, southern pine and other woods; their natural look is popular in California, the Northwest, and parts of the Midwest. Wood shingles are machinesawn; shakes are handmade, and their surfaces are rough. A point to consider: Some local building codes limit the use of wood shingles and shakes because of concerns about fire resistance. Many wood shingles and shakes only have Class C fire ratings or no ratings at all. However, Class A fire ratings are available for certain wood shingle products that incorporate a factory-applied, fire-resistant treatment.

Tile—clay or concrete—is a durable roofing material. Mission and Spanish-style round-topped tiles are used widely in the Southwest and Florida, and flat styles also are available to create French and English looks. Tile is available in a variety of colors and finishes. Tile is heavy. If you are replacing another type of roof system with tile, you will need to verify that the structure can support the load.

Slate is quarried in the United States in Vermont, New York, Pennsylvania, and Virginia. It is available in different colors and grades, depending on its origin. Considered virtually indestructible, it is, however, more expensive than other roofing materials. In addition, its application requires special skill and experience. Many old homes, especially in the Northeast, still are protected by this long-lasting roofing material.

Metal, primarily thought of as a low-slope roofing material, has been found to be a roofing alternative for home and building owners with steep-slope roofs. There are two types of metal roofing products: panels and shingles. Numerous metal panel shapes and configurations exist. Metal shingles typically are intended to simulate traditional roof coverings, such as wood shakes, shingles, and tile. Apart from metal roofing’s longevity, metal shingles are relatively lightweight, have a greater resistance to adverse weather and can be aesthetically pleasing. Some have Class A fire ratings.

Synthetic roofing products simulate various traditional roof coverings, such as slate and wood shingles and shakes. However, they do not necessarily have the same properties.

Before making a buying decision, NRCA recommends that you look at full-size samples of a proposed product, as well as manufacturers’ brochures. It also is a good idea to visit a home that is roofed with the product you are considering.

Ventilation and insulation are key

One of the most critical factors in roof system durability is proper ventilation. Without it, heat and moisture build-up in an attic area and combine to cause rafters and sheathing to rot, shingles to buckle, and insulation to lose its effectiveness. Click here to read about the importance of attic ventilation.

Therefore, it is important never to block off sources of roof ventilation, such as louvers, ridge vents or soffit vents, even in winter. Proper attic ventilation will help prevent structural damage caused by moisture, increase roofing material life, reduce energy consumption and enhance the comfort level of the rooms below the attic.

In addition to the free flow of air, insulation plays a key role in proper attic ventilation. An ideal attic has:

  • A gap-free layer of insulation on the attic floor to protect the house below from heat gain or loss
  • A vapor retarder under the insulation and next to the ceiling to stop moisture from rising into the attic
  • Enough open, vented spaces to allow air to pass in and out freely.
  • A minimum of 1 inch between the insulation and roof sheathing.

The requirements for proper attic ventilation may vary greatly, depending on the part of the United States in which a home or building is located, as well as the structure’s conditions, such as exposure to the sun, shade, and atmospheric humidity. Nevertheless, the general ventilation formula is based on the length and width of the attic. NRCA recommends a minimum of 1 square foot of free vent area for every 150 square feet of attic floor—with vents placed proportionately at the eaves (e.g., soffits) and at or near the ridge.

What we offer

  • Experienced Contractors
    Our staff has over a century of installation, repair and maintenance experience. The results will exceed your expectations. We’re committed to excellence!
  • Quality Products and Service
    Our high-quality products complement our superb service. We have an in-depth knowledge of various roofing materials.
  • Affordable Roofing Solutions
    We understand that design is very important. Our staff will help you choose the perfect roof within your budget.
Contact Us | We're Here to Help

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

Your personal info is safe with us.
X
CONTACT US